What is Door Bottom Sealing Strip?
The door bottom sealing strip has many nicknames, such as “door sweep”, “under door dust stopper”, etc. It is a strip-like item designed to fill the gap under the door.
Tanyo Industry, a professional door bottom sealing strip manufacturer, is committed to producing high-quality, medium-grade, and high-grade door bottom sealing strips. Our sealing strips have a variety of models and different materials for you to choose from, which can be adapted to different door types. The self-adhesive adhesive design easily fits to the bottom of various door frames. After installing our sealing strips, it not only plays a sound insulation role but can also prevent mosquitoes, dust, and other substances from entering the house.
Door Bottom Sealing Strip By Difference Types
We provide a variety of types of home door bottom seal strips, including U-shaped double-sided, L-shaped single-sided, solid rubber and aluminum alloy brush types, etc.
You can purchase products with standard specifications or customize them according to your needs. Customization options are rich and diverse, covering width, length, color, material, weight, logo, and other items to meet your individual needs.
-
U Shaped Door Sweep Weather Seal StripDouble-sided design, completely wrapping the bottom of the door, not easy to fall off, multi-layer rubber at the bottom, good sound insulation effect.
-
L Shaped Flexible Door Seal Weather StrippingMade of flexible rubber, an L-shaped design, the bottom also has three layers of seal,
and the sealing effect is good.
-
Exterior Door Bottom PVC Seal StripMade of solid PVC material, it is suitable for doors with small thicknesses, such as glass doors, bedroom wooden doors, sliding doors, and other door types.
-
Self Adhesive Rubber Door Bottom Seal StripMade of high-quality silicone rubber, the three-layer porous sound insulation cavity can better isolate noise. It is simple to install and can be cut as much as you want.
-
Aluminium Under Door Bottom Seal Brush StripIt adopts an aluminum alloy skeleton and detachable brush design, which is convenient for replacing brush strips in the future. The aluminum alloy material is more durable.
The service life of weatherstrips is approximately 5 years. It is recommended to replace them promptly when deformation or loss of elasticity is observed.
First, accurately measure the total perimeter of the door or window frame where the weatherstripping is to be installed (i.e., the sum of the lengths of all installation edges). Next, measure the width of the gap between the door or window and the frame when closed. When purchasing, the thickness of the weatherstripping should be approximately 3-5mm greater than the measured gap width to ensure effective sealing. The total length of weatherstripping required should be slightly longer than the measured total perimeter of the frame. It is recommended to allow an extra 5-10cm for installation at corners.
Before installation, please wipe away any dust from the bottom of the door panel. Then, select a door bottom weatherstrip of appropriate size, align it to a suitable position beneath the door panel (typically slightly lower than the ground), peel off the release film from its back, and firmly attach it flat. Ensure the bottom of the weatherstrip is lower than the ground to achieve effective windproof and soundproof results.
Dust on the door bottom weather strip can be removed by directly wiping it with a dry towel or wet wipe. For stubborn grease stains, add a small amount of dish soap or a teaspoon of white vinegar to water, dip a towel in the solution, wring it out, and carefully wipe clean.
